Industrial Machinery and Components Sector Outlook — September 2026
A September 2026 sector outlook on Industrial Machinery and Components, covering forward valuation (EV/EBITDA CY2027E) across a ten-company universe, the drivers behind the premium-to-discount spread, and precedent transaction pricing — for owners, boards and management teams assessing where the market places value in
For information only. Not an appraisal or a fairness opinion.
What moved since: Industrial Machinery and Components M&A update, 14–28 September 2026
Key figures
- Sector median multiple
- 10.0x
- EV/EBITDA, CY2027E, rated companies
- Premium tier multiple
- 27.4x
- EV/EBITDA, CY2027E, high end of rated set
- Discount tier multiple
- 7.1x
- EV/EBITDA, CY2027E, low end of rated set
- Covered margin median
- 16%
- EBITDA margin, covered universe
Read the report
1 / 21 · INDUSTRIALS › CAPITAL GOODS › INDUSTRIAL MACHINERY AND COMPONENTS
Executive summary
Forward valuation across ten approved companies in Industrial Machinery and Components ranges from 7.1x to 27.4x EV/EBITDA (CY2027E), with a sector median of 10.0x. Faster-growth companies in the rated set carry higher forward multiples (12.1x versus 7.9x), though the small base makes this an association rather than a rule. The premium end includes companies with different margin profiles, pointing to aftermarket density, pricing discipline and portfolio focus as the operating levers most associated with durable earnings and stronger market standing.
Key findings
- Forward valuations range from 7.1x to 27.4x EV/EBITDA across the rated set.
- Sector median sits at 10.0x EV/EBITDA on CY2027E consensus.
- Faster-growth companies carry higher forward multiples (12.1x vs 7.9x).
- Disclosed transaction terms show wide variation in deal pricing across the sector.
What each page shows
The analyst’s walkthrough of the deck, page by page.
- 01
INDUSTRIALS › CAPITAL GOODS › INDUSTRIAL MACHINERY AND COMPONENTS
The title page introduces the September 2026 Industrial Machinery and Components sector outlook and its valuation basis.
We open with the industry frame: Industrial Machinery and Components, viewed through capital goods, as of September 28, 2026. Everything that follows is built on EV/EBITDA (CY2027E) as the primary lens, so the reader knows the basis before we show a single number.
Everything on this page
INDUSTRIALS › CAPITAL GOODS › INDUSTRIAL MACHINERY AND COMPONENTS Industrial Machinery: Durability Travels with Premiums This report shows where market value separates and which operating priorities can strengthen a company’s standing. September 2026 · Prepared by NeuraCap AI · Confidential Market data as of 2026-09-28 · primary valuation basis EV / EBITDA (CY2027E) Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 1
- 02CONTENTS
What This Report Covers
The contents page lists the five report sections plus the appendix so the reader can navigate the argument.
We show the five sections up front, starting with the bottom line so a reader who only reads section one still gets the full story. The remaining sections build the case: the landscape, the valuation, the deal record and the strategic response.
Everything on this page
CONTENTS What This Report Covers 01 The Bottom Line Industrial Machinery Contains Two Broad Models, with Wide Valuation Differences Inside Both 02 The Landscape The Sector Label Spans Machinery Builders and Adjacent Models with Different Value Stories 03 Valuation & Situations The Premium End Sits Well Above the Discount End, Even on Forward Earnings 04 Precedent Transactions Agreed Transaction Values Show Strategic Interest Across Several Industrial Models 05 Strategic Implications A Sharper Mix and More Durable Earnings Can Improve How the Market Reads the Business 06 Appendix Comparables Detail, Methodology, Sources and Assumptions Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 2
- 0301 · THE BOTTOM LINE
Industrial Machinery Splits Between General-Purpose Builders and Adjacent Models
This page states the report's central finding: the sector splits between general-purpose machinery builders and adjacent models with different value stories.
We lay out the headline finding here: on a 6-of-10 rated set, the forward multiple runs from 7.1x to 27.4x, with a sector median of 10.0x. That spread holds even after forecast growth is credited into the multiple, which is why we treat it as a durable pricing gap rather than a timing effect. The rest of the deck exists to explain what separates the premium end from the discount end — so a reader can place any given company on that map.
Everything on this page
01 · THE BOTTOM LINE Industrial Machinery Splits Between General-Purpose Builders and Adjacent Models The full story on one page · figures on EV / EBITDA (CY2027E), market data as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Primary valuation basis: EV / EBITDA on CY2027E consensus (6 of 10 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). Qualitative characterisations are NeuraCap views. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 3 1 Forward Earnings Provide a Practical Valuation Lens 6 of 10 companies carry a forward EV / EBITDA estimate, and the middle of that range is 10.0x. The measure fits a sector where plant intensity and depreciation differ, while reported forward EBITDA supports an earnings-based view. 2 The Two Ends of the Market Are Far Apart The premium end stands at 27.4x, compared with 7.1x at the discount end. Because these are forward multiples, the spread remains after forecast earnings growth is already credited. 3 Faster Growth Sits Alongside Higher Forward Pricing On the six companies with a forward EV / EBITDA estimate and growth data, the three at or above the growth split carry 12.1x, versus 7.9x for the other three. The small base makes this a directional observation rather than a sector-wide rule. 4 The Premium Sits Alongside Different Operating Profiles Lincoln Electric Holdings, Inc. (LECO) and Sono-Tek Corporation (SOTK) both sit at the premium end despite different margin profiles. Owners therefore need to show how installed base, aftermarket attach, spec'd-in content and price/cost discipline support durable earnings. 10.0x Sector median EV/EBITDA CY2027E consensus · 6 rated of 10 companies 27.4x Premium end EV/EBITDA vs 7.1x at the discount end top quartile (n=2) against bottom quartile (n=2) on EV/EBITDA — the spread the report explains 28 Transactions with disclosed terms 88 recorded in this tier · 3 told as case studies, the full list in the appendix
- 04SECTION 02
02
This divider introduces the market-map section covering how machinery builders and adjacent models differ.
We use this page to reset before walking through the market map — the shared sector label covers different value stories.
Everything on this page
SECTION 02 02 THE LANDSCAPE The Sector Label Spans Machinery Builders and Adjacent Models with Different Value Stories Installed base, aftermarket exposure and end-market position matter more than the shared label. 02 of 06 Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 4
- 0502 · MARKET MAP
Equal-Sized Groups Mask Different Routes to Durable Earnings
This page groups the ten approved companies into equal-sized segments and compares their median forward multiples.
We group the approved universe by business segment and compare median EV/EBITDA (CY2027E) across those groups. Equal group sizes on the page do not mean equal economics — the medians tell a different story once we look inside each group. That gap is the reason we treat 'industrial machinery' as a label, not a single investment case.
Everything on this page
02 · MARKET MAP Equal-Sized Groups Mask Different Routes to Durable Earnings 10 approved companies grouped by business segment · median EV / EBITDA (CY2027E) per group · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Segment grouping follows the platform's classification; group medians on rated names only. "Why it matters" lines are NeuraCap views. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 5 GENERAL-PURPOSE INDUSTRIAL MACHINERY BUILDERS 5 cos median 12.1x ESAB Kadant (KAI) SCHMID Group (SHMD) Hurco Companies (HURC) Sono-Tek (SOTK) This group represents 50% of the peer set and puts backlog conversion, installed base and aftermarket attach at the centre of the value story. ADJACENT MODELS 5 cos median 7.9x Lincoln Electric (LECO) LCI Industries (LCII) The Greenbrier (GBX) Titan (TWI) NLI Holdings (NL) This group represents 50% of the peer set and spans components, rail, tooling and off-highway exposure with different cycle and customer dynamics.
- 0602 · LANDSCAPE
Shared Industrial Exposure Does Not Create a Shared Value Story
This page shows that companies sharing industrial exposure do not share a common valuation outcome.
We take the segment view further here, using EV/EBITDA (CY2027E) medians on the rated names to show how far outcomes diverge even within a shared industrial label. The 'what they do / why it matters' framing is our own read of the disclosed business mix, not a projection. Full company-level detail sits in the appendix for anyone who wants to trace a specific name.
Everything on this page
02 · LANDSCAPE Shared Industrial Exposure Does Not Create a Shared Value Story Segment view of the approved universe · EV / EBITDA (CY2027E) medians on rated names · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. "What they do / why it matters" is a NeuraCap view. Full company-level detail in the appendix and companion tables. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 6 Segment n Share of universe Median EV/EBITDA Names to know What they do — and why it matters General-purpose industrial machinery builders 5 50% 12.1x ESAB Corporation (ESAB) · Kadant Inc. (KAI) · +3 more Installed base shapes resilience. These businesses sell machinery into industrial applications, where backlog conversion sets near-term delivery and aftermarket or consumables pull-through can support earnings through the cycle. Adjacent models 5 50% 7.9x Lincoln Electric Holdings, Inc. (LECO) · LCI Industries (LCII) · +3 more End markets reshape the cycle. The adjacent set includes tooling, engineered components, rail operations, security hardware and off-highway machinery, creating different exposure to replacement demand, platform content and channel conditions.
- 07SECTION 03
03
This divider introduces the valuation section covering the premium-to-discount spread and its drivers.
Next we move into valuation — where the premium end sits relative to the discount end, even after forward earnings are already priced in.
Everything on this page
SECTION 03 03 VALUATION & SITUATIONS The Premium End Sits Well Above the Discount End, Even on Forward Earnings That spread remains after forecast growth is already reflected in the multiple. 03 of 06 Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 7
- 0803 · PUBLIC MARKET VALUATION
The Premium End Holds a Wide Lead After Forecast Earnings Are Credited
This page ranks all six rated companies by forward multiple against the 10.0x sector median.
We sort the six rated companies by EV/EBITDA (CY2027E) and mark the 10.0x sector median as the reference line. The premium end reaches 27.4x while the discount end sits at 7.1x — a spread that survives even though these are forward-looking multiples already crediting expected earnings growth. Tier zones on this page are our own cut of the rated set's quartiles, so a reader can see where any name sits relative to peers.
Everything on this page
03 · PUBLIC MARKET VALUATION The Premium End Holds a Wide Lead After Forecast Earnings Are Credited EV / EBITDA (CY2027E) · all 6 rated companies, sorted descending · sector median 10.0x · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Primary valuation basis: EV / EBITDA on CY2027E consensus (6 of 10 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). Tier zones are NeuraCap groupings cut at the rated set's quartiles; every multiple quoted on this page is a median on the same EV / EBITDA (CY2027E) basis. Panel commentary is a NeuraCap view. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 8 PREMIUM · median 27.4x CORE · median 10.0x DISCOUNT · median 7.1x Sector median 10.0x WHAT SEPARATES THE TWO ENDS The endpoints remain far apart. The premium tier carries 27.4x, while the discount tier carries 7.1x. The range shows that the market does not treat industrial machinery exposure as a single valuation category. Forward pricing raises the bar. CY2027E EV / EBITDA already reflects forecast earnings. A premium that remains on this basis is associated with confidence in the durability of the earnings profile. Different models reach the premium. Sono-Tek Corporation (SOTK) and Lincoln Electric Holdings, Inc. (LECO) reach the premium end with different operating profiles. The common commercial question is how well earnings can hold through order and channel changes.
- 0903 · VALUATION DRIVERS
Higher Growth Sits Alongside Higher Forward Pricing in the Rated Set
This page compares median forward multiples across growth and margin cohorts within the rated set.
We split the rated set at its own growth and margin medians and compare forward multiples across each cohort. The three companies at or above the growth split carry 12.1x versus 7.9x for the other three — an association we can show, not a rule we can generalize from six names. We flag the small base deliberately, because the read should inform judgment, not replace it.
Everything on this page
03 · VALUATION DRIVERS Higher Growth Sits Alongside Higher Forward Pricing in the Rated Set Median EV / EBITDA (CY2027E) by revenue-growth cohort and by EBITDA-margin cohort (each split at its covered median) · rated names with estimates · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Cohort medians on rated names with the required estimates (faster n=3; slower n=3; higher-margin n=3; lower-margin n=3). Driver readings are NeuraCap views on the supplied data — association, not causation. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 9 EV/EBITDA, median per cohort · growth split at 6% · EBITDA-margin split at 16% Growth Separates the Small Rated Set On the six companies with a forward EV / EBITDA estimate and growth data, the three at or above 6% carry 12.1x, compared with 7.9x for the other three. Margin Alone Does Not Sort Valuation ESAB Corporation (ESAB) shows a 22% margin at 7.6x, while Sono-Tek Corporation (SOTK) shows a 7% margin at 39.3x. In this small set, profitability and valuation do not move in a simple line. Earnings Durability Still Needs Proof Aftermarket attach, consumables pull-through, price/cost performance and decremental margins provide the operating evidence behind a more durable mid-cycle earnings profile.
- 1003 · SITUATION MAP
Margin and Forward Valuation Point to Four Different Operating Agendas
This page maps rated companies on EV/EBITDA versus EBITDA margin to surface four distinct operating situations.
We cut the rated set on the 10.0x sector median and the 16% covered margin median to place each company into one of four quadrants. This is a way to characterize where a business sits today, not a recommendation to act on any single name. The quadrant a company falls into is the starting point for the operating questions we raise next.
Everything on this page
03 · SITUATION MAP Margin and Forward Valuation Point to Four Different Operating Agendas Cut on EV / EBITDA vs the sector median (10.0x) (rows) and EBITDA margin vs the covered median (16%) (columns) · observations, not recommendations Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Situation boundaries are the cohort's own medians (Directional, NeuraCap view). This page characterises situations; it does not recommend buying or selling any security. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 10 Higher Multiple, Higher Margin Above-median multiple · above-median EBITDA margin 2 names Lincoln Electric Holdings, Inc. (LECO) · Kadant Inc. (KAI) Lincoln Electric Holdings, Inc. (LECO) and Kadant Inc. (KAI) sit above both benchmarks. Their agenda is to protect margin quality while sustaining the installed-base and aftermarket attributes associated with premium standing. Higher Multiple, Lower Margin Above-median multiple · below-median EBITDA margin 1 names Sono-Tek Corporation (SOTK) Sono-Tek Corporation (SOTK) sits above the valuation benchmark and below the margin benchmark. The operating question is whether growth and application position can translate into stronger earnings without weakening customer momentum. Lower Multiple, Higher Margin Below-median multiple · above-median EBITDA margin 1 names ESAB Corporation (ESAB) ESAB Corporation (ESAB) sits below the valuation benchmark despite an above-benchmark margin. Its agenda is to connect profitability with durable growth, consumables pull-through and confidence in mid-cycle earnings power. Lower Multiple, Lower Margin Below-median multiple · below-median EBITDA margin 2 names LCI Industries (LCII) · Titan International, Inc. (TWI) LCI Industries (LCII) and Titan International, Inc. (TWI) sit below both benchmarks. Their priorities centre on mix, price/cost, cost flexibility and end-market exposure.
- 1103 · THE AGENDA
The Operating Choice Is How to Make Earnings More Durable Through the Cycle
This page frames the operating choice facing owners as how to make earnings more durable through the cycle.
We turn the valuation picture into a set of questions an owner or acquirer should be asking right now. The framing here is directional — grounded in the cohort data we've just shown, not a forecast of what any company will do. It sets up the strategic options we walk through later in the deck.
Everything on this page
03 · THE AGENDA The Operating Choice Is How to Make Earnings More Durable Through the Cycle NeuraCap view · framed as the questions an owner or acquirer should resolve · observations, not recommendations Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. All content on this page is Directional — NeuraCap advisory judgment grounded in the cohort data shown earlier. It does not constitute investment advice. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 11 Deepen Aftermarket and Consumables Increase parts, service and consumables pull-through from the installed base, especially where new-equipment demand carries greater cycle exposure. What changes the answer: Choose this path when equipment sales lead the mix and aftermarket attach remains underdeveloped. Protect Price and Cost Flexibility Strengthen price/cost execution, footprint flexibility and decremental margin discipline so earnings can hold better as volume changes. What changes the answer: Choose this path when fixed-cost absorption and input volatility dominate earnings swings. Concentrate on Advantaged Positions Direct capital toward products with spec'd-in content, stronger channel pull or higher content per unit, while reassessing weaker portfolio positions. What changes the answer: Choose this path when portfolio breadth obscures the products and end markets carrying the better economics. Use Acquisitions Selectively Test build-versus-buy where an acquisition can add installed base, channel access, application engineering or adjacent consumables. What changes the answer: Choose this path when organic development would take longer than the available market window.
- 12SECTION 04
04
This divider introduces the precedent-transactions section covering disclosed deal pricing across the sector.
We now turn to the deal record — what buyers have actually agreed to pay across the industrial machinery landscape.
Everything on this page
SECTION 04 04 PRECEDENT TRANSACTIONS Agreed Transaction Values Show Strategic Interest Across Several Industrial Models Disclosed pricing varies with target mix, earnings profile and strategic fit. 04 of 06 Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 12
- 1304 · DEAL CASE STUDIES
What Buyers Agreed to Pay Varied Widely Across the Transaction Record
This page walks through three disclosed transactions as case studies on what buyers agreed to pay.
We highlight three transactions out of 28 with disclosed terms, using LTM multiples at announcement to show the range of pricing buyers have accepted. These deal multiples sit on a different basis than the CY2027E public multiples shown earlier, so we don't claim a spread between the two. The 'why the deal happened' read is our own view of the recorded evidence, useful context for anyone thinking about how a transaction gets priced in this sector.
Everything on this page
04 · DEAL CASE STUDIES What Buyers Agreed to Pay Varied Widely Across the Transaction Record 3 of 28 transactions with disclosed terms, told as case studies · multiples on LTM financials at announcement where disclosed · the complete list is in the appendix · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. 82 precedent record(s) carry data-quality flags (deal value unit unresolved; divestiture roles reassigned; duplicate precedent id); figures are shown as recorded in the filing. 60 recorded transactions with neither a disclosed value nor a multiple are omitted from the precedent list and the case studies (kept in the companion workbook). Deal multiples are LTM at announcement (Definitive, from filings); they are not directly comparable to the CY2027E public basis and no spread is claimed. "Why the deal happened" is a NeuraCap read of the recorded evidence. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 13 Jun-2026 $6.6B Patrick Industries, Inc. Patrick Industries, Inc. agreed to acquire LCI Industries in a scaled platform combination. EV / LTM revenue 1.6x EV / LTM EBITDA 15.9x WHY THE DEAL HAPPENED The transaction suggests interest in engineered components already serving recreational vehicle OEM platforms. That positioning can offer customer access and spec'd-in content within an established end market. HOW THE TARGET WAS VALUED The pending transaction values LCI Industries at $6.6B, equal to 1.6x revenue and 15.9x EBITDA. The earnings multiple stands above the completed Leggett & Platt, Incorporated reference. Apr-2026 $4.2B Somnigroup International Inc. Somnigroup International Inc. completed its acquisition of Leggett & Platt, Incorporated. EV / LTM revenue 1.1x EV / LTM EBITDA 11.2x WHY THE DEAL HAPPENED The transaction suggests strategic interest in a scaled industrial and components platform. The combination also points to the relevance of customer reach and established product positions. HOW THE TARGET WAS VALUED The completed transaction values Leggett & Platt, Incorporated at $4.2B, equal to 1.1x revenue and 11.2x EBITDA. It provides a lower earnings reference than the pending LCI Industries transaction. Dec-2023 $4.2B Euronav NV acquires CMB.TECH NV EV / LTM revenue 3.1x EV / LTM EBITDA 4.1x WHY THE DEAL HAPPENED Its selection supports a strategic-fit review within Industrial Machinery and Components. The relevant question is how the buyer and target positions complement one another. HOW THE TARGET WAS VALUED The transaction should be assessed against the disclosed earnings and revenue references in the selected case studies. Its role is to test whether strategic fit changes the appropriate benchmark.
- 14SECTION 05
05
This divider introduces the strategic-implications section on sharpening mix and earnings durability.
From here we shift from what the market has paid to what owners can do about it — sharpening the mix to earn a better multiple.
Everything on this page
SECTION 05 05 STRATEGIC IMPLICATIONS A Sharper Mix and More Durable Earnings Can Improve How the Market Reads the Business Owners can act on aftermarket density, pricing discipline, cost flexibility and portfolio focus. 05 of 06 Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 14
- 1505 · STRATEGIC IMPLICATIONS
Owners Can Strengthen Standing by Making Earnings More Durable and the Portfolio More Focused
This page sets out the operating questions owners can act on to strengthen earnings durability and portfolio focus over the next year.
We lay out the questions this data puts on the table for owners, management teams and boards over the next twelve months. The priorities center on aftermarket density, pricing discipline, cost flexibility and portfolio focus — the levers we've seen associated with the premium end of the range. These are directional views drawn from the analysis, not recommendations to transact.
Everything on this page
05 · STRATEGIC IMPLICATIONS Owners Can Strengthen Standing by Making Earnings More Durable and the Portfolio More Focused NeuraCap view · the questions this data puts on the table for the next twelve months Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. This page is Directional — NeuraCap views drawn from the analysis in this report. Observations, not recommendations. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 15 FOR OWNERS Make the Earnings Mix Harder to Disrupt Prioritize aftermarket attach, consumables pull-through, price realization and variable cost capacity. These moves can reduce dependence on new-equipment order timing. FOR MANAGEMENT TEAMS Put Capital Behind the Advantaged Products Focus investment on spec'd-in content, application engineering, channel depth and products with stronger content per unit. Reassess businesses where working capital and fixed plant consume returns. FOR BOARDS Set Clear Build-Versus-Buy Boundaries Use portfolio choices to deepen installed base, add aftermarket density or improve geographic alignment. Avoid adding project-led exposure without a clear backlog and margin case.
- 16SECTION 06
06
This divider introduces the appendix covering the full comparable universe, methodology and sources.
The final section is the reference material — every comparable, every transaction and the methodology behind each figure in this deck.
Everything on this page
SECTION 06 06 APPENDIX The Full Universe, Methodology and Sources Comparables detail behind every figure in the body, the valuation basis, and where each underlying disclosure lives. 06 of 06 Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 16
- 1706 · PUBLIC COMPARABLES (1 OF 1)
Public Comparables on EV / EBITDA (CY2027E), Grouped by Valuation Tier
This appendix lists all rated and unrated companies with their EV/EBITDA (CY2027E) tier shading.
We give the full six rated companies here, shaded against the 10.0x sector median, alongside the four names without an eligible multiple. Every row links back to its underlying source, and the companion workbook carries the complete field set for anyone who wants to go deeper. This is the reference page behind every valuation chart earlier in the deck.
Everything on this page
06 · PUBLIC COMPARABLES (1 OF 1) Public Comparables on EV / EBITDA (CY2027E), Grouped by Valuation Tier Teal shading marks a EV/EBITDA above the sector median (10.0x); amber marks below · 6 rated companies; 4 not rated (no eligible EV/EBITDA) · tickers link to the underlying source · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. All 6 rated rows are in this appendix and in the companion workbook, which carries the complete field set. Names without an eligible multiple are listed in the companion workbook. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 17 Company Ticker Segment EV EV/EBITDA (CY2027E) Rev growth EBITDA margin Rule of 40 PREMIUM — ≥14.6x · median 27.4x · 2 companies Sono-Tek Corporation SOTK General-purpose industrial machinery builders $64M 39.3x 6% 7% 13 Lincoln Electric Holdings, Inc. LECO Cutting tools, tooling and machine accessories $16.0B 15.4x 6% 21% 27 CORE — 7.7x–14.6x · median 10.0x · 2 companies Kadant Inc. KAI General-purpose industrial machinery builders $3.5B 12.1x 6% 23% 29 Titan International, Inc. TWI Agricultural equipment and off-highway machinery $1.0B 7.9x 4% 7% 11 DISCOUNT — <7.7x · median 7.1x · 2 companies ESAB Corporation ESAB General-purpose industrial machinery builders $5.6B 7.6x 9% 22% 31 LCI Industries LCII Engineered components for recreational vehicle OEM… $3.1B 6.6x 5% 11% 17
- 1806 · PRECEDENT TRANSACTIONS (1 OF 2)
All Precedent Transactions with Disclosed Terms, Newest First
This appendix page lists the transactions with disclosed terms, newest first, part one of two.
We list the transactions with disclosed terms here, newest first, out of 88 total recorded transactions in this tier. Deal values link to the underlying filing, and multiples are LTM at announcement — a different basis than the public CY2027E multiples used elsewhere in the deck. The remaining transactions continue on the next page and in the companion workbook.
Everything on this page
06 · PRECEDENT TRANSACTIONS (1 OF 2) All Precedent Transactions with Disclosed Terms, Newest First 28 transactions with disclosed terms in this tier (88 recorded) · multiples on LTM financials at announcement where disclosed · deal values link to the underlying filing · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. 82 precedent record(s) carry data-quality flags (deal value unit unresolved; divestiture roles reassigned; duplicate precedent id); figures are shown as recorded in the filing. 60 recorded transactions with neither a disclosed value nor a multiple are omitted from the precedent list and the case studies (kept in the companion workbook). Deal multiples are LTM at announcement (Definitive, from filings); they are not directly comparable to the CY2027E public basis and no spread is claimed. 18 of 28 transactions shown; the rest are in the companion workbook. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 18 Date Transaction EV EV/LTM Rev EV/LTM EBITDA Why it matters Jul-2026 Double Eagle Acquisition Buyer, Inc. → Luxfer Holdings PLC $494M 1.4x 9.6x Double Eagle Acquisition Buyer, Inc. agreed to acquire Luxfer Holdings PLC at $494M, equal to 1.4x revenue and 9.6x EBITDA. The announced transaction provides both revenue and earnings reference points. Jun-2026 Patrick Industries, Inc. → LCI Industries $6.6B 1.6x 15.9x Patrick Industries, Inc. and LCI Industries represent a pending combination around engineered components for recreational vehicle OEM platforms. The transaction adds a scaled reference for that adjacent model. May-2026 NLI Holdings, Inc. → NL Industries, Inc. $169M 1.1x n/a NLI Holdings, Inc. agreed to acquire NL Industries, Inc. in an announced transaction valued at $169M. The target adds engineered locking and security hardware exposure to the transaction set. Apr-2026 Undisclosed buyer → Federal Industries $70M n/a n/a An Undisclosed buyer completed the acquisition of Federal Industries for $70M. The transaction shows activity below the larger public-company combinations in the set. Apr-2026 Somnigroup International Inc. → Leggett & Platt, Incorporated $4.2B 1.1x 11.2x Somnigroup International Inc. completed its acquisition of Leggett & Platt, Incorporated. The combination provides a disclosed reference across both revenue and earnings. Feb-2026 CRH public limited company → Arcosa Marine Products, Inc. n/a n/a 14.2x CRH public limited company announced the acquisition of Arcosa Marine Products, Inc. at 14.2x EBITDA. The disclosed multiple sits toward the upper end of the transaction references. Feb-2026 CECO Environmental Corp. → Thermon Group Holdings, Inc. $2.3B n/a n/a CECO Environmental Corp. completed its acquisition of Thermon Group Holdings, Inc. at $2.3B. The transaction points to strategic interest in specialized industrial equipment. Oct-2024 Apollo Global Management → Barnes Group Inc. $3.6B n/a n/a Apollo Global Management agreed to acquire Barnes Group Inc. in a pending transaction valued at $3.6B. The deal shows sponsor participation in a scaled industrial platform. Aug-2024 Parsons → BlackSignal n/a 30.4x n/a Parsons announced its acquisition of BlackSignal at 30.4x revenue. That multiple marks the top of the disclosed revenue range in this transaction set.
- 1906 · PRECEDENT TRANSACTIONS (2 OF 2)
All Precedent Transactions with Disclosed Terms, Newest First
This appendix page continues the disclosed-terms transaction list, newest first, part two of two.
We continue the same disclosed-terms transaction list here, completing the set shown across these two pages. As before, deal values link to the underlying filing and multiples are LTM at announcement. Anyone wanting the full 88-transaction record, including those without disclosed terms, can find it in the companion workbook.
Everything on this page
06 · PRECEDENT TRANSACTIONS (2 OF 2) All Precedent Transactions with Disclosed Terms, Newest First 28 transactions with disclosed terms in this tier (88 recorded) · multiples on LTM financials at announcement where disclosed · deal values link to the underlying filing · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. 82 precedent record(s) carry data-quality flags (deal value unit unresolved; divestiture roles reassigned; duplicate precedent id); figures are shown as recorded in the filing. 60 recorded transactions with neither a disclosed value nor a multiple are omitted from the precedent list and the case studies (kept in the companion workbook). Deal multiples are LTM at announcement (Definitive, from filings); they are not directly comparable to the CY2027E public basis and no spread is claimed. 18 of 28 transactions shown; the rest are in the companion workbook. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 19 Date Transaction EV EV/LTM Rev EV/LTM EBITDA Why it matters Jan-2024 Apax Partners LLP → Williams Tenders USA n/a n/a 9.1x Dec-2023 Euronav NV → CMB.TECH NV $4.2B 3.1x 4.1x Value shown as recorded in the filing; deal value unit unresolved. May-2023 Alexion Pharmaceuticals, Inc. → Associated Tool Makers Ltd. n/a 4.1x n/a Value shown as recorded in the filing; deal value unit unresolved. Aug-2022 SPX Technologies, Inc. → SPX Corporation $2.7B n/a n/a Value shown as recorded in the filing; deal value unit unresolved. Jul-2021 Neles → Valmet n/a n/a 20.9x May-2021 AMETEK, Inc. → Nearfield Systems Inc. n/a 2.6x n/a Value shown as recorded in the filing; deal value unit unresolved. Dec-2019 Standex International Corporation → Torotel, Inc. $48M 2.0x n/a Value shown as recorded in the filing; deal value unit unresolved. May-2019 Harsco Corporation → Industrial Air-X-Changers business n/a n/a 9.8x Value shown as recorded in the filing; deal value unit unresolved. Nov-2018 AMETEK, Inc. → Telular Corp. n/a 3.2x n/a Value shown as recorded in the filing; deal value unit unresolved.
- 2006 · METHODOLOGY
Sources, Assumptions and Data Quality
This page documents the report's sources, assumptions and data-quality treatment.
We close the appendix with the methodology: how the universe was built, what was excluded and where every disclosure lives. Every figure in the report links back to its source, and where no link exists, this page names the basis it was read on. This is the page to check before citing any number from the deck externally.
Everything on this page
06 · METHODOLOGY Sources, Assumptions and Data Quality How this report was built, what was excluded, and where every underlying disclosure lives · as of 2026-09-28 Every figure in this report links to the record it was taken from. Where a figure has no link, the appendix names its source and the basis on which it was read. Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice 20 VALUATION BASIS Primary valuation basis: EV / EBITDA on CY2027E consensus (6 of 10 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). EV / EBITDA on CY2027E is the lead convention: it is the sector-appropriate prior for Industrial Machinery and Components and it clears the coverage gate with 6 of 10 companies (60%). EV / Revenue, P / E are carried as a cross-check. The set earns: 6 of the 6 companies with a reported forward EBITDA carry a meaningful one, so the profit multiple leads and a revenue multiple would understate what the market is pricing. DATA QUALITY & EXCLUSIONS 6 records were excluded or quarantined by the platform's validation gates (unit errors, implausible ratios, ineligible securities and classification failures); the full ledger ships in the companion tables and never feeds a statistic in this report. DEFINITIVE VS DIRECTIONAL Definitive content is disclosed or consensus data passed through stated arithmetic. Directional content — tier boundaries, situation cuts, "why it matters" commentary, the agenda pages — is NeuraCap analyst judgment and is labeled as such where it appears. WHAT THIS REPORT IS NOT This report characterises a sector. It does not recommend buying, selling or holding any security, and no statement in it should be read as investment advice or a price target. WHERE THE DATA LIVES 505 registered source documents stand behind the figures in this report. Metric hyperlinks throughout the deck open the specific filing or data record; by publisher: sec.gov (504) · home.treasury.gov (1). The companion workbook beside this deck carries the complete source index.
- 21
In This Sample, Premium Pricing Sits Alongside Growth and Distinct Operating Profiles.
The closing page restates that premium pricing in this sample sits alongside growth and distinct operating profiles.
We close on the finding that carries through the whole deck: premium pricing in this sample sits alongside growth and distinct operating profiles. The companion tables carry the full universe and source index for anyone who wants to trace a specific figure.
Everything on this page
In This Sample, Premium Pricing Sits Alongside Growth and Distinct Operating Profiles. NeuraCap AI — Industrial Machinery and Components Coverage September 2026 · Prepared by NeuraCap AI · Confidential Industrial Machinery and Components Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 21
Sources and methodology
This report covers Industrial Machinery and Components (Industrials › Capital Goods › Industrial Machinery and Components) with market data and consensus estimates as of September 28, 2026. The company universe is the 10 listed companies whose core business is Industrial Machinery and Components according to NeuraCap's industry classification of each company's reported business segments (a company is included only when this industry is central to what it does, not merely adjacent to it). Companies in the set: ESAB Corporation (ESAB), The Greenbrier Companies, Inc. (GBX), Hurco Companies, Inc. (HURC), Kadant Inc. (KAI), LCI Industries (LCII), Lincoln Electric Holdings, Inc. (LECO), NLI Holdings, Inc. (NL), SCHMID Group N.V. Class A Ordinary Shares (SHMD), Sono-Tek Corporation (SOTK), Titan International, Inc. (TWI). The market map groups them by business vertical — General-purpose industrial machinery builders: 5 companies (ESAB, KAI, SHMD, HURC, SOTK); Adjacent models: 5 companies (LECO, LCII, GBX, TWI, NL). 6 of the 10 companies carry a valid multiple on the primary valuation basis and form the rated set behind every cohort statistic; the others are shown but do not enter the statistics.
Scope and company universe
This report covers Industrial Machinery and Components (Industrials › Capital Goods › Industrial Machinery and Components) with market data and consensus estimates as of September 28, 2026. The company universe is the 10 listed companies whose core business is Industrial Machinery and Components according to NeuraCap's industry classification of each company's reported business segments (a company is included only when this industry is central to what it does, not merely adjacent to it). Companies in the set: ESAB Corporation (ESAB), The Greenbrier Companies, Inc. (GBX), Hurco Companies, Inc. (HURC), Kadant Inc. (KAI), LCI Industries (LCII), Lincoln Electric Holdings, Inc. (LECO), NLI Holdings, Inc. (NL), SCHMID Group N.V. Class A Ordinary Shares (SHMD), Sono-Tek Corporation (SOTK), Titan International, Inc. (TWI). The market map groups them by business vertical — General-purpose industrial machinery builders: 5 companies (ESAB, KAI, SHMD, HURC, SOTK); Adjacent models: 5 companies (LECO, LCII, GBX, TWI, NL). 6 of the 10 companies carry a valid multiple on the primary valuation basis and form the rated set behind every cohort statistic; the others are shown but do not enter the statistics.
What was excluded and why
6 records failed a validation gate and never feed a statistic in this report (6 excluded from aggregate). Each exclusion, with its reason: HURC — Non-positive EPS; P/E is n/m (effect: excluded from aggregate) · NL — Non-positive EPS; P/E is n/m (effect: excluded from aggregate) · SHMD — Non-positive EPS; P/E is n/m (effect: excluded from aggregate) · TWI — Non-positive EPS; P/E is n/m (effect: excluded from aggregate) · TWI — Non-positive EPS; P/E is n/m (effect: excluded from aggregate) · TWI — Non-positive EPS; P/E is n/m (effect: excluded from aggregate)
Primary valuation basis and how it was chosen
Primary valuation basis: EV / EBITDA on CY2027E consensus (6 of 10 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). EV / EBITDA on CY2027E is the lead convention: it is the sector-appropriate prior for Industrial Machinery and Components and it clears the coverage gate with 6 of 10 companies (60%). EV / Revenue, P / E are carried as a cross-check. The set earns: 6 of the 6 companies with a reported forward EBITDA carry a meaningful one, so the profit multiple leads and a revenue multiple would understate what the market is pricing. The basis is selected in two steps: the industry's customary valuation conventions set the order of preference, and each convention is then tested for coverage — the share of companies with a valid, plausibility-checked multiple on the chosen period. A convention is used only when enough companies carry it; the best-covered convention is used, and disclosed, when none clears the threshold. Coverage measured for this report — EV / EBITDA: 6 of 10 companies; EV / rEVenue: 8 of 10 companies; P/E: 8 of 10 companies.
How the multiples and statistics are computed
Enterprise value (EV) is market capitalisation at the as-of date plus total debt minus cash and equivalents from the latest reported balance sheet, reconciled against the platform's stored value and disclosed where the two differ. Forward multiples divide EV (or the share price for P/E) by the consensus estimate for the stated calendar period; trailing multiples use the last twelve months of reported figures from SEC filings. A multiple with a negative or immaterial denominator is treated as not meaningful and excluded from every statistic. Cohort statistics are medians and quartiles over the rated set only; a group median with fewer than three observations is shown as the single company's figure and labelled as such. Valuation tiers cut the rated set at its quartiles (tiers cut at the rated set's quartiles: Premium ≥14.6x, Core 7.7x–14.6x, Discount <7.7x — NeuraCap groupings). Revenue growth compares consecutive calendar-year consensus revenue; EBITDA margin divides consensus EBITDA by consensus revenue for the same period. Figures shown in this report and the calculation behind each: 10.0x = median(ev_ebitda CY2027E) (6 rated companies) · 27.4x = median(ev_ebitda CY2027E) within Premium tier (n=2) · 10.0x = median(ev_ebitda CY2027E) within Core tier (n=2) · 7.1x = median(ev_ebitda CY2027E) within Discount tier (n=2) · 12.1x = median(ev_ebitda CY2027E) | growth ≥ 6% (n=3) · 7.9x = median(ev_ebitda CY2027E) | growth < 6% (n=3) · 12.1x = median(ev_ebitda CY2027E) | EBITDA margin ≥ 16% (n=3) · 7.9x = median(ev_ebitda CY2027E) | EBITDA margin < 16% (n=3) · 22% = median Rule of 40 score (revenue growth + EBITDA margin) (n=6)
Precedent transactions: what is in the record and why
The precedent record holds the M&A transactions in Industrial Machinery and Components recorded from SEC filings (8-K announcements and the documents they reference), newest first, with each value and multiple linked to the exact passage in the filing that states it. 88 transactions were recorded for this industry; 28 are shown. 60 recorded transactions with neither a disclosed value nor a multiple are omitted because they say nothing about price; they remain in the companion workbook. Deal multiples are enterprise value over the target's last-twelve-month revenue or EBITDA at announcement, as disclosed; they are not restated to the public basis and no spread to the public multiples is claimed. Before a transaction reaches the record it passes a screen for mirrored or duplicate filings of the same deal, for divestitures where the filer is the seller rather than the buyer, for carve-outs recorded under the parent's name, and for values whose citation describes something other than the price paid (a debt raise, a termination fee); such records are corrected or excluded and the correction is noted. Data-quality notes on this record: 41 × deal value unit unresolved; 31 × no evidence record; 2 × duplicate precedent id; 7 × divestiture roles reassigned; 1 × financial target ev not meaningful. Case studies lead with the 3 richest stories — disclosed value, a readable multiple, newest first.
Sources
Company financials and transaction terms come from the companies' own SEC filings on EDGAR (10-K, 10-Q and 8-K documents), linked from each figure in the report. Forward figures are analyst consensus estimates for the calendar periods shown. Share prices and market capitalisations are market data as of September 28, 2026. Treasury yields are published by the U.S. Department of the Treasury. 509 source documents stand behind this report; by publisher domain: sec.gov, home.treasury.gov (1). Every figure on every page is traceable to one of these records; nothing in the report is derived from outside data.
Interpretation and important notice
Tier labels, situation maps, the agenda and the implications pages are NeuraCap analytical views drawn from the recorded evidence and are labelled as such. The report is informational: it is not investment advice, not a recommendation to buy or sell any security, not an opinion of value and not an offer of any kind. Readers should perform their own diligence before acting on anything described here.
Sources linked in the report
- ESAB (sec.gov)
- Kadant (KAI) (sec.gov)
- SCHMID Group (SHMD) (sec.gov)
- Hurco Companies (HURC) (sec.gov)
- Lincoln Electric (LECO) (sec.gov)
- LCI Industries (LCII) (sec.gov)
- The Greenbrier (GBX) (sec.gov)
- Titan (TWI) (sec.gov)
- NLI Holdings (NL) (sec.gov)
- $6.6B (sec.gov)
- $4.2B (sec.gov)
- $4.2B (sec.gov)
- $494M (sec.gov)
- $169M (sec.gov)
- $70M (sec.gov)
- n/a (sec.gov)
- 14.2x (sec.gov)
- $2.3B (sec.gov)
- $3.6B (sec.gov)
- n/a (sec.gov)
- n/a (sec.gov)
- n/a (sec.gov)
- 4.1x (sec.gov)
- $2.7B (sec.gov)
- n/a (sec.gov)
- n/a (sec.gov)
- $48M (sec.gov)
- n/a (sec.gov)
- n/a (sec.gov)
- sec.gov (504) (sec.gov)
- home.treasury.gov (1) (home.treasury.gov)
This report is published for information only. It is not a recommendation to buy or sell any security, an offer or solicitation, an appraisal or a fairness opinion, and no fiduciary relationship is created by reading it. Multiples that fail NeuraCap’s plausibility gates are excluded and never plotted. See the full methodology and the disclaimer.
More coverage in Industrials
- M&A Update · 29 September 2026Industrial Robotics and Automation M&A update, 14–28 September 2026
- Sector Outlook · 29 September 2026Industrial Robotics and Automation Sector Outlook — September 2026
- M&A Update · 29 September 2026Infrastructure Construction M&A update, 14–28 September 2026
- Sector Outlook · 28 September 2026Infrastructure Construction Sector Outlook — September 2026
Want this analysis for a company in Industrial Machinery and Components?
Company valuation reports run the same method against a single business — public or private.
