NEURACAP
Sector OutlookPublished · 20 pages · Free to read

Tools and Hardware Sector Outlook — September 2026

This sector outlook examines six listed tools and hardware companies, comparing forward EV/EBITDA multiples, margin and channel drivers, and six recorded precedent transactions. Built for owners, operators and acquirers assessing where a tools business sits in the valuation range and what moves it up.

For information only. Not an appraisal or a fairness opinion.

What moved since: Tools and Hardware M&A update, 14–28 September 2026

Key figures

Sector median multiple
12.4x
EV/EBITDA (CY2027E)
Top of range
13.6x
EV/EBITDA (CY2027E)
Bottom of range
5.2x
EV/EBITDA (CY2027E)
Trade tool makers share
67%
of six listed names

Read the report

NeuraCap

INDUSTRIALS › CAPITAL GOODS › TOOLS AND HARDWARE

Tools and Hardware: One Sector, Two Pricing Regimes

A read on six listed tools and hardware names: where the forward earnings multiple sits, what sits alongside it in margin and channel, and what the transaction record shows.

September 2026 · Prepared by NeuraCap AI · Confidential

Market data as of 2026-09-28 · primary valuation basis EV / EBITDA (CY2027E)

Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice

1

1 / 20

Executive summary

Tools and hardware trades as three businesses under one label, and trade tool makers—67% of the six listed names—set the reference price at 11.1x EV/EBITDA (CY2027E). Across four rated names, forward multiples range from 5.2x to 13.6x against a sector median of 12.4x, a spread wider than the growth readings across the set, with margin and channel quality distinguishing top from bottom. The precedent record shows six recorded transactions pricing from 7.0x to 13.0x EBITDA, with the wider multiples sitting alongside branded tool lines that completed a buyer's range.

Key findings

  • Trade tool makers are two thirds of the set and price at a median 11.1x EV/EBITDA.
  • Four of six rated names span 5.2x to 13.6x EV/EBITDA (CY2027E), median 12.4x.
  • Growth clusters near 4% or below; margins spread from 11% to 27%, the real divider.
  • Six recorded deals price from 7.0x to 13.0x EBITDA, widest where a brand fills a gap.

What each page shows

The analyst’s walkthrough of the deck, page by page.

  1. 01
    INDUSTRIALS › CAPITAL GOODS › TOOLS AND HARDWARE

    Tools and Hardware: One Sector, Two Pricing Regimes

    The cover introduces the tools and hardware sector outlook and its core finding that one label covers two distinct pricing regimes.

    We open with the sector's central tension: tools and hardware trades as one label but prices as two very different regimes. Everything that follows in this report explains why, so the client can see exactly where value concentrates.

    Everything on this page

    INDUSTRIALS › CAPITAL GOODS › TOOLS AND HARDWARE Tools and Hardware: One Sector, Two Pricing Regimes A read on six listed tools and hardware names: where the forward earnings multiple sits, what sits alongside it in margin and channel, and what the transaction record shows. September 2026 · Prepared by NeuraCap AI · Confidential Market data as of 2026-09-28 · primary valuation basis EV / EBITDA (CY2027E) Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 1

  2. 02
    CONTENTS

    What This Report Covers

    This slide lists the report's five sections plus appendix, running from the bottom line through strategic implications.

    We've structured this report so the bottom line comes first: even a reader who only reads section one leaves with the full story. The sections that follow build the evidence — landscape, valuation, precedents and strategic implications — for anyone who wants to go deeper.

    Everything on this page

    CONTENTS What This Report Covers 01 The Bottom Line Position in the Range Matters More than the Sector Label 02 The Landscape Three Business Models Sit Under the Tools and Hardware Label 03 Valuation & Situations Four of the Six Names Carry a Forward Estimate, and They Do Not Price Alike 04 Precedent Transactions What Buyers Agreed to Pay Across Six Recorded Tools Transactions 05 Strategic Implications What Moves a Tools Business up the Range 06 Appendix Comparables Detail, Methodology, Sources and Assumptions Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 2

  3. 03
    01 · THE BOTTOM LINE

    Tools and Hardware Trades as Three Businesses, and Trade Tool Makers Sit at Both Ends of the Range

    This page sets out the report's central finding: tools and hardware trades as three business models, with trade tool makers spanning the full range of valuations.

    Of the six listed names, four carry a forward EV/EBITDA estimate for CY2027E, with the sector median at 12.4x, the top of the range at 13.6x and the bottom at 5.2x. That gap between top and bottom is wider than the gap in growth across the set, so where a company sits inside the sector matters more than the sector label itself. Trade tool makers account for most of the group and appear at both ends of that range, which tells us business model alone doesn't explain the spread — execution does.

    Everything on this page

    01 · THE BOTTOM LINE Tools and Hardware Trades as Three Businesses, and Trade Tool Makers Sit at Both Ends of the Range The full story on one page · figures on EV / EBITDA (CY2027E), market data as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Primary valuation basis: EV / EBITDA on CY2027E consensus (4 of 6 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). Qualitative characterisations are NeuraCap views. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 3 1 The Distance Between the Top and the Bottom Is Worth More than the Label Of the six listed names, four carry a forward EV / EBITDA estimate for CY2027E, and the middle of the range sits at 12.4x. The top of the range is 13.6x and the bottom is 5.2x, so where a company sits inside the sector carries more weight than the sector itself. 2 Trade Tool Makers Are Two Thirds of the Set and Set the Reference Price Tool and accessory manufacturing for the trades accounts for 67% of the six listed names, and the middle of that group prices at 11.1x. Connected cutting tools for makers and builders' hardware are single-name groups read against that reference rather than the other way round. 3 With Growth Bunched up, Margin Is Where These Names Separate Five of the six listed names show growth of 4% or below, with Kennametal Inc. (KMT) at 17%. Margins across the four names with a forward EBITDA estimate run from 11% to 27%, a wider spread than the growth readings. 4 Where a Deal Filled a Gap in the Buyer's Range, the Multiple Ran Higher Across six recorded transactions in tools and hardware, what buyers agreed to pay ranges from 7.0x to 13.0x EBITDA. The upper end sits with a branded hand-tool line moving to a diversified tools owner; the lower end sits with welding and industrial consumables assets. 12.4x Sector median EV/EBITDA CY2027E consensus · 4 rated of 6 companies 13.6x Premium end EV/EBITDA vs 5.2x at the discount end top quartile (n=1) against bottom quartile (n=1) on EV/EBITDA — the spread the report explains 6 Transactions with disclosed terms 13 recorded in this tier · 0 told as case studies, the full list in the appendix

  4. 04
    SECTION 02

    02

    This divider introduces the section on the three business models inside the tools and hardware label.

    We now turn to the market map: three business models sit under the tools and hardware label, and they sell to different buyer groups. This section shows how the group breaks down before we get to valuation.

    Everything on this page

    SECTION 02 02 THE LANDSCAPE Three Business Models Sit Under the Tools and Hardware Label Trade tools dominate the count; maker devices and builders' hardware sell to different buyer groups. 02 of 06 Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 4

  5. 05
    02 · MARKET MAP

    Two Thirds of the Set Makes Tools for the Trades; The Rest Sells to Different Buyer Groups

    This slide groups the six approved companies by business segment and shows the median valuation for each group.

    67% of the six listed names make tools for the trades, and that group prices at a median 11.1x EV/EBITDA (CY2027E) — the reference point the rest of the set is read against. The remaining names split across connected cutting tools for makers and builders' hardware, each selling to a distinct buyer group. Segment alone doesn't set the price; it sets the audience a name is really being compared to, so what matters next is how each group actually trades.

    Everything on this page

    02 · MARKET MAP Two Thirds of the Set Makes Tools for the Trades; The Rest Sells to Different Buyer Groups 6 approved companies grouped by business segment · median EV / EBITDA (CY2027E) per group · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Segment grouping follows the platform's classification; group medians on rated names only. "Why it matters" lines are NeuraCap views. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 5 TOOL AND ACCESSORY MANUFACTURING FOR THE TRADES 4 cos median 11.1x Stanley Black & (SWK) Snap-on (SNA) The Toro (TTC) Kennametal (KMT) Four of the six listed names sit here and the middle of the group prices at 11.1x, but pro-brand equity, channel and accessory pull-through separate them from one another. CONNECTED PRECISION CUTTING TOOLS AND CONSUMABLES FOR MAKERS 1 cos 13.6x · 1 rated Cricut (CRCT) Cricut, Inc. (CRCT) sells a connected device into a materials and subscription annuity, so attach rate and repeat purchase carry the case rather than jobsite durability. BUILDERS' HARDWARE AND LONG-HANDLE JOBSITE TOOLS 1 cos no rated names Griffon (GFF) Griffon Corporation (GFF) is read on end-market mix and channel position, with demand associated with residential construction and home improvement activity.

  6. 06
    02 · LANDSCAPE

    One Label, Three Ways to Make Money in Tools and Hardware

    This slide walks through what each of the three segments does and why it matters commercially.

    We lay out what each segment actually does — trade tools, maker devices, builders' hardware — and why that distinction matters when reading a multiple. Full company-level detail sits in the appendix. Understanding the segment a company competes in is the first filter before comparing it on valuation, so this page sets up the group medians we build on next.

    Everything on this page

    02 · LANDSCAPE One Label, Three Ways to Make Money in Tools and Hardware Segment view of the approved universe · EV / EBITDA (CY2027E) medians on rated names · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. "What they do / why it matters" is a NeuraCap view. Full company-level detail in the appendix and companion tables. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 6 Segment n Share of universe Median EV/EBITDA Names to know What they do — and why it matters Tool and accessory manufacturing for the trades 4 67% 11.1x Stanley Black & Decker, Inc. (SWK) · Snap-on Incorporated (SNA) · +2 more Two thirds of the set. Stanley Black & Decker, Inc. (SWK), Snap-on Incorporated (SNA), The Toro Company (TTC) and Kennametal Inc. (KMT) sit here, 67% of the six listed names. They share a label but not a model: big-box durable goods, a franchised van channel, seasonal outdoor equipment and metalcutting consumables, with different margin structures across the four. Connected precision cutting tools and consumables for makers 1 17% 13.6x n=1 Cricut, Inc. (CRCT) One device, recurring consumables. Cricut, Inc. (CRCT) sells a connected cutting machine into materials, accessories and subscription revenue underneath it. Razor-and-blade economics make attach rate and repeat purchase the operating question, which is a different underwriting frame from the trade tool names. Builders' hardware and long-handle jobsite tools 1 17% — Griffon Corporation (GFF) Tied to housing turnover. Griffon Corporation (GFF) covers builders' hardware and long-handle jobsite tools, where demand is associated with residential construction and home improvement activity. It carries no forward EBITDA estimate in this set, so it is read on end-market mix, brand pull and channel position rather than on the lens.

  7. 07
    SECTION 03

    03

    This divider introduces the section on public market valuation across the four rated names.

    We move next to valuation: four of the six names carry a forward estimate, and they do not price alike. The gap between the top and the bottom of that range is wider than the gap in growth, which is the story this section unpacks.

    Everything on this page

    SECTION 03 03 VALUATION & SITUATIONS Four of the Six Names Carry a Forward Estimate, and They Do Not Price Alike The gap between the top and the bottom of the range is wider than the gap in growth. 03 of 06 Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 7

  8. 08
    03 · PUBLIC MARKET VALUATION

    The Top of the Range Holds a Premium That a Forward Lens Has Already Credited

    This slide ranks the four rated companies by EV/EBITDA (CY2027E) against the sector median of 12.4x.

    Across the four rated names, we sort EV/EBITDA (CY2027E) descending against a sector median of 12.4x, and the top of the range holds a premium that the forward lens has already credited. That premium isn't arbitrary — it sits alongside the margin and channel quality we cover next. For a client benchmarking against this group, the median is the starting point, but the tier a name sits in tells the more useful story.

    Everything on this page

    03 · PUBLIC MARKET VALUATION The Top of the Range Holds a Premium That a Forward Lens Has Already Credited EV / EBITDA (CY2027E) · all 4 rated companies, sorted descending · sector median 12.4x · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Primary valuation basis: EV / EBITDA on CY2027E consensus (4 of 6 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). Tier zones are NeuraCap groupings cut at the rated set's quartiles; every multiple quoted on this page is a median on the same EV / EBITDA (CY2027E) basis. Panel commentary is a NeuraCap view. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 8 PREMIUM · median 13.6x CORE · median 12.4x DISCOUNT · median 5.2x Sector median 12.4x WHAT SEPARATES THE TWO ENDS The top sells through franchisees. Snap-on Incorporated (SNA) runs a franchised van channel with a credit arm attached and carries a 27% EBITDA margin — service and financing margin that a big-box route does not carry. That profile is what sits alongside the top of the range here. The bottom carries capex beta. Kennametal Inc. (KMT) carries growth of 17%, above the rest of the six listed names, and still sits at the bottom of the range. Metalcutting consumables consumption tracks machine hours and industrial production, so earnings move with a customer capex cycle the pro tool names are less tied to. A forward multiple already credits growth. The lens is CY2027E, so the multiple has already taken forecast growth into account. A premium that survives a forward lens is a statement about how durable the earnings are held to be, not about next year's order book.

  9. 09
    03 · VALUATION DRIVERS

    Growth Sits Close Together; Margin and Channel Sit Far Apart

    This slide compares valuation across revenue-growth and EBITDA-margin cohorts to see which driver explains the spread.

    We split the rated names by growth and by margin: growth clusters tightly — most sit at 4% or below, with Kennametal Inc. (KMT) at 17% — while margins spread from 11% to 27%, a far wider range. That pattern is an association we observe in the data, not a claim that margin causes the multiple. For a client thinking about where to invest next, margin mix looks like the more promising lever, since growth alone doesn't separate this set.

    Everything on this page

    03 · VALUATION DRIVERS Growth Sits Close Together; Margin and Channel Sit Far Apart Median EV / EBITDA (CY2027E) by revenue-growth cohort and by EBITDA-margin cohort (each split at its covered median) · rated names with estimates · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Cohort medians on rated names with the required estimates (faster n=0; slower n=0; higher-margin n=0; lower-margin n=0). Driver readings are NeuraCap views on the supplied data — association, not causation. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 9 Growth Readings Cluster in a Narrow Band Growth across the six listed names clusters at 4% and below, with Cricut, Inc. (CRCT) at 1%. When the growth line looks alike, the pricing question moves to what the earnings are made of. Attachment Underneath the Installed Base Battery platform breadth and accessory pull-through turn a one-time tool sale into repeat consumables revenue. Buyers read that annuity differently from unit shipments, and the names in this set carry very different amounts of it. Pro, Van and Dealer Routes Against Big-Box Dependence Pro and van channels carry service and price realisation that a big-box planogram does not, and they behave differently through a channel destock. Customer concentration with a handful of large retailers is the other side of the same trade. Sourcing Footprint Sits Inside the Gross Margin Bridge Landed cost, country of origin and tariff classification move gross margin week to week, and near-market manufacturing is a cost-and-risk trade rather than a fix. Where price/cost holds through a tariff move, the margin line holds with it.

  10. 10
    03 · SITUATION MAP

    Four Names, Four Corners: Where Margin and Multiple Line Up

    This slide places the four rated names into a two-by-two grid cut on multiple versus margin, both against their cohort medians.

    We cut the four rated names on EV/EBITDA versus the sector median of 12.4x, and on EBITDA margin versus the covered median of 15%, to see where each name actually sits. This is a map of observations, not a set of recommendations. It gives the client a shared vocabulary for where a name sits today before deciding what to do about it.

    Everything on this page

    03 · SITUATION MAP Four Names, Four Corners: Where Margin and Multiple Line Up Cut on EV / EBITDA vs the sector median (12.4x) (rows) and EBITDA margin vs the covered median (15%) (columns) · observations, not recommendations Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. Situation boundaries are the cohort's own medians (Directional, NeuraCap view). This page characterises situations; it does not recommend buying or selling any security. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 10 Priced up with Margin Behind It Above-median multiple · above-median EBITDA margin 1 names Snap-on Incorporated (SNA) Snap-on Incorporated (SNA) sits above the multiple line and above the margin line, the one of the four rated names in this corner. A franchised van channel with credit attached carries service margin that a retail route does not, and that is the profile sitting alongside the top of the range. Priced up Ahead of Margin Above-median multiple · below-median EBITDA margin 1 names Cricut, Inc. (CRCT) Cricut, Inc. (CRCT) prices above the multiple line with a margin below the covered middle of 15%. The weight of that position rests on consumables attachment and repeat purchase rather than on current profitability. Margin in Place, Multiple Below Below-median multiple · above-median EBITDA margin 1 names Kennametal Inc. (KMT) Kennametal Inc. (KMT) carries a margin above the middle of the four rated names while pricing at the bottom of the range. Metalcutting consumables consumption tracks machine hours and industrial production, and that cyclicality is the trade-off sitting alongside the margin. Below Both Lines Below-median multiple · below-median EBITDA margin 1 names Stanley Black & Decker, Inc. (SWK) Stanley Black & Decker, Inc. (SWK) sits below both lines, with growth of 2% and a margin at the bottom of the four rated names. The case here runs through the gross margin bridge — price/cost, mix and productivity — and through channel inventory normalising against sell-through.

  11. 11
    03 · THE AGENDA

    Decide Where the Next Dollar Earns the Higher Multiple

    This slide frames the questions an owner or acquirer should resolve to move up the valuation range.

    We frame this as the agenda: the questions an owner or acquirer needs to resolve to earn the higher multiple on the next dollar of capital. These are NeuraCap's observations grounded in the cohort data, not recommendations to buy or sell any security. The value of this page is in the discipline of asking the question before committing capital.

    Everything on this page

    03 · THE AGENDA Decide Where the Next Dollar Earns the Higher Multiple NeuraCap view · framed as the questions an owner or acquirer should resolve · observations, not recommendations Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. All content on this page is Directional — NeuraCap advisory judgment grounded in the cohort data shown earlier. It does not constitute investment advice. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 11 Grow the Consumables Annuity Under the Installed Base Accessory and consumables pull-through per tool sold is what turns a durable-goods sale into repeat earnings, and it is the part of the P&L that reads as annuity rather than shipment. The question is how much of the installed base is actually being monetised after the first sale. What changes the answer: Attach rate and consumables revenue per unit moving ahead of tool shipments over consecutive quarters. Weight the Mix Toward Channels That Hold Price Pro, van and dealer routes carry service and price realisation that a big-box planogram does not, and they behave differently when the channel destocks. Concentration with a handful of large retailers is the exposure on the other side of that mix. What changes the answer: Sell-through holding while sell-in falls, with pro-channel share of revenue rising through the cycle. Price the Sourcing Footprint Against Tariff Exposure Landed cost by sourcing country and customs classification are live gross-margin variables, and near-market manufacturing is a cost-and-risk trade with a real capital bill attached. The decision is which categories can carry price and which cannot. What changes the answer: Price/cost holding positive in the gross margin bridge through a tariff or freight move. Test Build Against Buy on the Categories You Are Missing The recorded transactions cluster around brands and consumables lines that completed a buyer's range or reached a channel it did not have. The same test applies internally: whether a missing category is cheaper to develop than to acquire. What changes the answer: A gap in the range that repeat customers are filling from another supplier.

  12. 12
    SECTION 04

    04

    This divider introduces the section on precedent transactions in tools and hardware.

    We turn now to the deal record: six recorded transactions in tools and hardware, one completed and five announced, spanning branded hand tools, welding, hardware carve-outs and tooling know-how. This section shows what buyers actually agreed to pay.

    Everything on this page

    SECTION 04 04 PRECEDENT TRANSACTIONS What Buyers Agreed to Pay Across Six Recorded Tools Transactions One completed and five announced, spanning branded hand tools, welding, hardware carve-outs and tooling know-how. 04 of 06 Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 12

  13. 13
    04 · DEAL CASE STUDIES

    The Wider Multiples in the Record Sit with Tool Brands That Fit an Existing Platform

    This slide walks through two case studies from the precedent transactions where terms were disclosed.

    We look closely at two of the recorded transactions where terms were disclosed, and the wider multiples in that record sit with tool brands that completed an existing platform. Across the full set, price agreed ranges from 7.0x to 13.0x EBITDA on an LTM-at-announcement basis, which is not directly comparable to the CY2027E public basis used earlier — we draw no spread between the two. For a client evaluating a bolt-on, the pattern is a useful reference for what the market has actually paid for fit.

    Everything on this page

    04 · DEAL CASE STUDIES The Wider Multiples in the Record Sit with Tool Brands That Fit an Existing Platform 2 of 6 transactions with disclosed terms, told as case studies · multiples on LTM financials at announcement where disclosed · the complete list is in the appendix · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. 22 precedent record(s) carry data-quality flags (deal value unit unresolved; divestiture roles reassigned; duplicate precedent id); figures are shown as recorded in the filing. 7 recorded transactions with neither a disclosed value nor a multiple are omitted from the precedent list and the case studies (kept in the companion workbook). Deal multiples are LTM at announcement (Definitive, from filings); they are not directly comparable to the CY2027E public basis and no spread is claimed. "Why the deal happened" is a NeuraCap read of the recorded evidence. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 13 Oct-2012 n/a Spectrum Brands Holdings, Inc. acquires Hardware & Home Improvement Group of Stanley Black & Decker, Inc. EV / LTM revenue n/a EV / LTM EBITDA 7.4x WHY THE DEAL HAPPENED Spectrum Brands Holdings, Inc. moved for Hardware & Home Improvement Group of Stanley Black & Decker, Inc. in Oct-2012; the record shows it as announced. HOW THE TARGET WAS VALUED Terms were not fully disclosed; the transaction anchors the reference set rather than the price. May-2010 n/a CGI Group acquires Stanley EV / LTM revenue 1.2x EV / LTM EBITDA 11.7x WHY THE DEAL HAPPENED CGI Group moved for Stanley in May-2010; the record shows it as announced. HOW THE TARGET WAS VALUED Terms were not fully disclosed; the transaction anchors the reference set rather than the price.

  14. 14
    SECTION 05

    05

    This divider introduces the section on strategic implications and the operating levers behind the range.

    We close the analysis with what moves a tools business up the range: margin mix, channel and attachment are the operating levers the figures point to. This section turns the data into a set of practical questions for the next twelve months.

    Everything on this page

    SECTION 05 05 STRATEGIC IMPLICATIONS What Moves a Tools Business up the Range Margin mix, channel and attachment are the operating levers these figures point to. 05 of 06 Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 14

  15. 15
    05 · STRATEGIC IMPLICATIONS

    Three Moves That Strengthen Where a Tools Business Sits in the Range

    This slide sets out three moves that strengthen where a tools business sits in the valuation range.

    We put three moves on the table: strengthening margin quality, weighting the channel mix toward routes that hold price, and building the consumables and attachment story under the installed base. These are NeuraCap's views drawn from the analysis in this report, framed as observations rather than recommendations. For an owner or operator, they are the questions worth resolving over the next twelve months if the goal is a higher multiple.

    Everything on this page

    05 · STRATEGIC IMPLICATIONS Three Moves That Strengthen Where a Tools Business Sits in the Range NeuraCap view · the questions this data puts on the table for the next twelve months Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. This page is Directional — NeuraCap views drawn from the analysis in this report. Observations, not recommendations. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 15 FOR OWNERS Margin Quality Is Where This Set Separates Growth readings sit close together across the six listed names while margins spread widely, so the mix of revenue behind the margin is the part worth working on. Aftermarket and MRO exposure, consumables attachment and pro-channel weighting are the components that hold up when a cycle turns. FOR OPERATORS Attachment Is the Lever Under a Durable-Goods P&L Battery platform ownership and accessory pull-through convert one-time tool sales into repeat revenue, and that is visible in the gap between the names at the top and bottom of this range. Managing new product vitality and inventory turns alongside it keeps cash conversion in step with the revenue mix. FOR CAPITAL ALLOCATION The Record Shows Where Buyers Stretch Across six recorded transactions, the wider multiples sit with branded tool lines that completed a buyer's range, and the tighter ones with welding and hardware carve-outs. That pattern is a useful reference for pricing internal investment in categories, brands and channel reach.

  16. 16
    SECTION 06

    06

    This divider introduces the appendix covering the full comparables universe, methodology and sources.

    We close with the full universe, methodology and sources: the comparables detail behind every figure in the body, the valuation basis, and where each disclosure lives. This is the reference section for anyone who wants to go deeper on a specific name.

    Everything on this page

    SECTION 06 06 APPENDIX The Full Universe, Methodology and Sources Comparables detail behind every figure in the body, the valuation basis, and where each underlying disclosure lives. 06 of 06 Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 16

  17. 17
    06 · PUBLIC COMPARABLES (1 OF 1)

    Public Comparables on EV / EBITDA (CY2027E), Grouped by Valuation Tier

    This table lists all six public comparables on EV/EBITDA (CY2027E), flagging four rated names against the sector median of 12.4x.

    This appendix carries all four rated names against the sector median of 12.4x, alongside the two names without an eligible multiple. It gives the client the complete comparables set behind the figures used earlier in this report. It's a compact reference for the group medians discussed in the body.

    Everything on this page

    06 · PUBLIC COMPARABLES (1 OF 1) Public Comparables on EV / EBITDA (CY2027E), Grouped by Valuation Tier Teal shading marks a EV/EBITDA above the sector median (12.4x); amber marks below · 4 rated companies; 2 not rated (no eligible EV/EBITDA) · tickers link to the underlying source · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. All 4 rated rows are in this appendix and in the companion workbook, which carries the complete field set. Names without an eligible multiple are listed in the companion workbook. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 17 Company Ticker Segment EV EV/EBITDA (CY2027E) Rev growth EBITDA margin Rule of 40 PREMIUM — ≥13.6x · median 13.6x · 1 companies Snap-on Incorporated SNA Tool and accessory manufacturing for the trades $18.7B 13.6x 4% 27% 31 CORE — 9.6x–13.6x · median 12.4x · 2 companies Cricut, Inc. CRCT Connected precision cutting tools and consumables for… $1.1B 13.6x 1% 11% 12 Stanley Black & Decker, Inc. SWK Tool and accessory manufacturing for the trades $20.4B 11.1x 2% 12% 14 DISCOUNT — <9.6x · median 5.2x · 1 companies Kennametal Inc. KMT Tool and accessory manufacturing for the trades $3.0B 5.2x 17% 17% 35

  18. 18
    06 · PRECEDENT TRANSACTIONS (1 OF 1)

    All Precedent Transactions with Disclosed Terms, Newest First

    This table lists all recorded precedent transactions with disclosed terms, sorted newest first.

    This appendix lists every recorded transaction with disclosed terms, sorted newest first, with multiples on LTM financials at announcement. It's the full deal record behind the case studies covered earlier in this report. This is the reference for anyone comparing precedent pricing across the sector.

    Everything on this page

    06 · PRECEDENT TRANSACTIONS (1 OF 1) All Precedent Transactions with Disclosed Terms, Newest First 6 transactions with disclosed terms in this tier (13 recorded) · multiples on LTM financials at announcement where disclosed · deal values link to the underlying filing · as of 2026-09-28 Source: NeuraCap analytics platform; market data and consensus estimates as of 2026-09-28; company disclosures via SEC EDGAR where linked. 22 precedent record(s) carry data-quality flags (deal value unit unresolved; divestiture roles reassigned; duplicate precedent id); figures are shown as recorded in the filing. 7 recorded transactions with neither a disclosed value nor a multiple are omitted from the precedent list and the case studies (kept in the companion workbook). Deal multiples are LTM at announcement (Definitive, from filings); they are not directly comparable to the CY2027E public basis and no spread is claimed. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 18 Date Transaction EV EV/LTM Rev EV/LTM EBITDA Why it matters Feb-2021 Worthington Industries, Inc. → General Tools & Instruments Company LLC n/a 1.8x 7.9x Worthington Industries, Inc. completed its purchase of General Tools & Instruments Company LLC in February 2021 at 7.9x EBITDA and 1.8x revenue. A metals group taking a branded measuring and marking line is a move toward consumer and trade shelf position. Apr-2017 Lincoln Electric Holdings Inc. → Air Liquide Welding n/a n/a 7.0x Lincoln Electric Holdings Inc. announced the acquisition of Air Liquide Welding at 7.0x EBITDA, at the lower end of the recorded range. Welding consumables and equipment sit close to the metalcutting side of this sector, where earnings move with industrial production. Mar-2017 Stanley Black & Decker, Inc. → Tools business (unit of Tools business of Newell Brands Inc.) n/a n/a 13.0x Stanley Black & Decker, Inc. announced the acquisition of the Tools business (unit of Tools business of Newell Brands Inc.) in March 2017 at 13.0x EBITDA. A diversified tools owner taking branded hand tools it could route through retail and pro channels it already… Oct-2012 Spectrum Brands Holdings, Inc. → Hardware & Home Improvement Group of Stanley Black & Decker, Inc. n/a n/a 7.4x Spectrum Brands Holdings, Inc. announced the purchase of the Hardware & Home Improvement Group of Stanley Black & Decker, Inc. in October 2012 at 7.4x EBITDA. A diversified parent moving a non-core hardware line to a consumer products group is the carve-out pattern… Jan-2012 Kennametal Inc. → Deloro Stellite Group n/a n/a 8.0x Kennametal Inc. announced the acquisition of Deloro Stellite Group at 8.0x EBITDA. Adding coatings and alloy know-how to an existing tooling franchise points at application engineering and specification position rather than volume. May-2010 CGI Group → Stanley n/a 1.2x 11.7x CGI Group announced the acquisition of Stanley in May 2010 at 11.7x EBITDA and 1.2x revenue. That multiple sits in the upper half of the six recorded transactions, above the welding and hardware carve-outs and below the branded hand-tool transaction.

  19. 19
    06 · METHODOLOGY

    Sources, Assumptions and Data Quality

    This slide explains the report's sources, valuation basis and data-quality exclusions.

    We set out here how this report was built: the valuation basis used, what was excluded and why, and the data-quality flags carried in the transaction record. This is the section that grounds every figure used earlier in the report.

    Everything on this page

    06 · METHODOLOGY Sources, Assumptions and Data Quality How this report was built, what was excluded, and where every underlying disclosure lives · as of 2026-09-28 Every figure in this report links to the record it was taken from. Where a figure has no link, the appendix names its source and the basis on which it was read. Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice 19 VALUATION BASIS Primary valuation basis: EV / EBITDA on CY2027E consensus (4 of 6 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). EV / EBITDA on CY2027E is the lead convention: it is the sector-appropriate prior for Tools and Hardware and it clears the coverage gate with 4 of 6 companies (67%). EV / Revenue, P / E are carried as a cross-check. The set earns: 4 of the 4 companies with a reported forward EBITDA carry a meaningful one, so the profit multiple leads and a revenue multiple would understate what the market is pricing. DATA QUALITY & EXCLUSIONS 0 records were excluded or quarantined by the platform's validation gates (unit errors, implausible ratios, ineligible securities and classification failures); the full ledger ships in the companion tables and never feeds a statistic in this report. DEFINITIVE VS DIRECTIONAL Definitive content is disclosed or consensus data passed through stated arithmetic. Directional content — tier boundaries, situation cuts, "why it matters" commentary, the agenda pages — is NeuraCap analyst judgment and is labeled as such where it appears. WHAT THIS REPORT IS NOT This report characterises a sector. It does not recommend buying, selling or holding any security, and no statement in it should be read as investment advice or a price target. WHERE THE DATA LIVES 294 registered source documents stand behind the figures in this report. Metric hyperlinks throughout the deck open the specific filing or data record; by publisher: sec.gov (293) · home.treasury.gov (1). The companion workbook beside this deck carries the complete source index.

  20. 20

    Across Six Listed Names, the Top of the Range Sits Alongside Margin and Channel Quality.

    The closing slide restates the report's central finding: valuation premium tracks with margin and channel quality.

    We end where we began: across six listed names, the top of the range sits alongside margin and channel quality, not just segment or size. That's the discipline worth carrying into any conversation about capital allocation in this sector.

    Everything on this page

    Across Six Listed Names, the Top of the Range Sits Alongside Margin and Channel Quality. NeuraCap AI — Tools and Hardware Coverage September 2026 · Prepared by NeuraCap AI · Confidential Tools and Hardware Coverage | September 2026 | Confidential | Not investment advice Sources & methodology 20

Sources and methodology

This report covers Tools and Hardware (Industrials › Capital Goods › Tools and Hardware) with market data and consensus estimates as of September 28, 2026. The company universe is the 6 listed companies whose core business is Tools and Hardware according to NeuraCap's industry classification of each company's reported business segments (a company is included only when this industry is central to what it does, not merely adjacent to it). Companies in the set: Cricut, Inc. (CRCT), Griffon Corporation (GFF), Kennametal Inc. (KMT), Snap-on Incorporated (SNA), Stanley Black & Decker, Inc. (SWK), The Toro Company (TTC). The market map groups them by business vertical — Tool and accessory manufacturing for the trades: 4 companies (SWK, SNA, TTC, KMT); Connected precision cutting tools and consumables for makers: 1 company (CRCT); Builders' hardware and long-handle jobsite tools: 1 company (GFF). 4 of the 6 companies carry a valid multiple on the primary valuation basis and form the rated set behind every cohort statistic; the others are shown but do not enter the statistics.

Scope and company universe

This report covers Tools and Hardware (Industrials › Capital Goods › Tools and Hardware) with market data and consensus estimates as of September 28, 2026. The company universe is the 6 listed companies whose core business is Tools and Hardware according to NeuraCap's industry classification of each company's reported business segments (a company is included only when this industry is central to what it does, not merely adjacent to it). Companies in the set: Cricut, Inc. (CRCT), Griffon Corporation (GFF), Kennametal Inc. (KMT), Snap-on Incorporated (SNA), Stanley Black & Decker, Inc. (SWK), The Toro Company (TTC). The market map groups them by business vertical — Tool and accessory manufacturing for the trades: 4 companies (SWK, SNA, TTC, KMT); Connected precision cutting tools and consumables for makers: 1 company (CRCT); Builders' hardware and long-handle jobsite tools: 1 company (GFF). 4 of the 6 companies carry a valid multiple on the primary valuation basis and form the rated set behind every cohort statistic; the others are shown but do not enter the statistics.

What was excluded and why

No company or value in this universe failed the validation gates; every recorded figure enters the statistics on its stated basis.

Primary valuation basis and how it was chosen

Primary valuation basis: EV / EBITDA on CY2027E consensus (4 of 6 companies eligible; multiples failing the platform's plausibility gates are excluded, never plotted). EV / EBITDA on CY2027E is the lead convention: it is the sector-appropriate prior for Tools and Hardware and it clears the coverage gate with 4 of 6 companies (67%). EV / Revenue, P / E are carried as a cross-check. The set earns: 4 of the 4 companies with a reported forward EBITDA carry a meaningful one, so the profit multiple leads and a revenue multiple would understate what the market is pricing. The basis is selected in two steps: the industry's customary valuation conventions set the order of preference, and each convention is then tested for coverage — the share of companies with a valid, plausibility-checked multiple on the chosen period. A convention is used only when enough companies carry it; the best-covered convention is used, and disclosed, when none clears the threshold. Coverage measured for this report — EV / EBITDA: 4 of 6 companies; EV / rEVenue: 6 of 6 companies; P/E: 6 of 6 companies.

How the multiples and statistics are computed

Enterprise value (EV) is market capitalisation at the as-of date plus total debt minus cash and equivalents from the latest reported balance sheet, reconciled against the platform's stored value and disclosed where the two differ. Forward multiples divide EV (or the share price for P/E) by the consensus estimate for the stated calendar period; trailing multiples use the last twelve months of reported figures from SEC filings. A multiple with a negative or immaterial denominator is treated as not meaningful and excluded from every statistic. Cohort statistics are medians and quartiles over the rated set only; a group median with fewer than three observations is shown as the single company's figure and labelled as such. Valuation tiers cut the rated set at its quartiles (tiers cut at the rated set's quartiles: Premium ≥13.6x, Core 9.6x–13.6x, Discount <9.6x — NeuraCap groupings). Revenue growth compares consecutive calendar-year consensus revenue; EBITDA margin divides consensus EBITDA by consensus revenue for the same period. Figures shown in this report and the calculation behind each: 12.4x = median(ev_ebitda CY2027E) (4 rated companies) · 13.6x = median(ev_ebitda CY2027E) within Premium tier (n=1) · 12.4x = median(ev_ebitda CY2027E) within Core tier (n=2) · 5.2x = median(ev_ebitda CY2027E) within Discount tier (n=1) · 22% = median Rule of 40 score (revenue growth + EBITDA margin) (n=4)

Precedent transactions: what is in the record and why

The precedent record holds the M&A transactions in Tools and Hardware recorded from SEC filings (8-K announcements and the documents they reference), newest first, with each value and multiple linked to the exact passage in the filing that states it. 13 transactions were recorded for this industry; 6 are shown. 7 recorded transactions with neither a disclosed value nor a multiple are omitted because they say nothing about price; they remain in the companion workbook. Deal multiples are enterprise value over the target's last-twelve-month revenue or EBITDA at announcement, as disclosed; they are not restated to the public basis and no spread to the public multiples is claimed. Before a transaction reaches the record it passes a screen for mirrored or duplicate filings of the same deal, for divestitures where the filer is the seller rather than the buyer, for carve-outs recorded under the parent's name, and for values whose citation describes something other than the price paid (a debt raise, a termination fee); such records are corrected or excluded and the correction is noted. Data-quality notes on this record: 10 × deal value unit unresolved; 9 × no evidence record; 1 × duplicate precedent id; 2 × divestiture roles reassigned. Case studies lead with the 0 richest stories — disclosed value, a readable multiple, newest first.

Sources

Company financials and transaction terms come from the companies' own SEC filings on EDGAR (10-K, 10-Q and 8-K documents), linked from each figure in the report. Forward figures are analyst consensus estimates for the calendar periods shown. Share prices and market capitalisations are market data as of September 28, 2026. Treasury yields are published by the U.S. Department of the Treasury. 298 source documents stand behind this report; by publisher domain: sec.gov, home.treasury.gov (1). Every figure on every page is traceable to one of these records; nothing in the report is derived from outside data.

Interpretation and important notice

Tier labels, situation maps, the agenda and the implications pages are NeuraCap analytical views drawn from the recorded evidence and are labelled as such. The report is informational: it is not investment advice, not a recommendation to buy or sell any security, not an opinion of value and not an offer of any kind. Readers should perform their own diligence before acting on anything described here.

Sources linked in the report

This report is published for information only. It is not a recommendation to buy or sell any security, an offer or solicitation, an appraisal or a fairness opinion, and no fiduciary relationship is created by reading it. Multiples that fail NeuraCap’s plausibility gates are excluded and never plotted. See the full methodology and the disclaimer.

Want this analysis for a company in Tools and Hardware?

Company valuation reports run the same method against a single business — public or private.